25
è21604211




þ System requirements:

    100% IBM PC, XT, AT, PS/1, PS/2 compatable.
    EGA or VGA graphics adapter, paper white monitor may
     be used.
    Mouse, since the program interfaces with the stan-
     dard mouse routines almost any type of mouse will
     work.
    Fixed disk highly recommended.
    The CONFIG.SYS must contain: FILES=30, or greater.
    At least 512K of RAM (Approx. 430k of free space).
    An XT (8088) will work, but it is very slow.
   ___________________________________________________


* AT, IBM, PS/1, and PS/2 are registered trademarks and
  PC/XT is a trademark of International Business Machines
  Corporation.
è20207800Version 1.2
001
24

                    Table of Contents

  System requirements............................page 1
  What is Gen7?.......................................3
  Help on HELP........................................3
  Getting around in Gen7..............................4
  Selecting the Gen7 utilities........................5
  File management utility.............................6
  Operations with sub-directories.....................8
  Main menu (pull down)...............................9
  Installing and removing user programs..............18
  Using the calendar.................................20
  Using the calculator...............................23
  Miscellaneous functions............................23
  Using a text editor with Gen7......................24
  Children's Tutorials...............................25
  Quick reference (Hot keys).........................26
  Warranty...........................................27
  License & Copyright Notice.........................28
  License for Registered Users.......................30
  Ordering Information...............................31
  The Accounting Module..............................32
002
26
þ What is Gen7?
    Gen7 is a graphic user interface that allows the
    user to perform DOS functions with simple intuitive
    actions.  Gen7 allows the user to perform opera-
    tions such as disk to disk copy as well as direc-
    tory to directory file copy.  It allows the user to
    perform these functions while assuring the user the
    operation is being executed properly by interfacing
    with the user while the operation is being performed.

þ Help on HELP.
    You may view the entire help file whenever Gen7
    enters the help box.  The 'Next ' and 'Last '
    switches will allow you to page through the file.

   To jump to page 1 of the help file click (press & re-
    lease) the left mouse button on the blue switch. To
    jump to the quick reference, click on the magenta
    switch.  Both switches are located in the upper
    right corner.
   To close the help box click on the red switch locat-
    ed in the upper left corner.
è05021000(PgUp/PgDn from the keyboard may also be used.)
è16227000(Home/End may also be used.)
è28229400(Esc may also be used.)
003
22
þ Getting around in Gen7.
     Although the cursor keys along with selected hot-
     keys may be used to perform all functions a mouse is
     highly recommended.  In fact a mouse must be instal-
     led for Gen7 to load and run!

    Selecting a drop menu.
     Move the mouse cursor to one of the menu switches
     and click (press & release) the left mouse button.
     The alternate method is to strike the Fkey shown on
     the menu switch.  The drop menu will then be dis-
     played.  Select the desired option with the mouse.
     You will notice the choices are highlighted as you
     move the mouse cursor.  If the selection is grayed
     out, this indicates that this option is not avail-
     able.  For example, if a filebox is not in the work
     area then menu choices related to files are 'grayed
     out'. They are active when a filebox is active.
    Closing a drop menu.
     To close the drop menu you may either click the
     right mouse button or strike the [Esc] key.
004
26
þ Selecting the Gen7 utilities.
     There are three additional utilities available in
     Gen7 along with the file management utility.  To
     select a utility, first click (press & release) the
     left mouse button on the desired utility icon.  The
     icon will now become the mouse cursor.  Move the
     icon to the work area and click the mouse button
     again.  A small clock is also available in addition
     to the large clock.  Strike the F9 key to toggle
     the small clock on and off.  Note that user icons
     are not available with the small clock active.
    After selecting the large clock (icon) the follow-
     ing functions are available:
         F6 - Set alarm.
         F7 - Set the system time.
         F9 - Close the large clock and toggle on the
              small clock.
         F10 - Save the screen NOW!
    Other utilities include:
         Calculator - see page 23.
         Calendar - see page 20.
         MATHTUTR & TIMETUTR - see page 25.
è21819800(See page 14)
è01818812
è01827010
è05628209
005
26
þ File management utility.
     Gen7 will recognize up to eight floppy and fixed
     disk drives.  Installed drives are represented by
     a 'floppy disk' icon.  Four drives will be display-
     ed at one time.  Click on the blue switch in the
     upper left corner to toggle between drive groups.
    To open a filebox click (press & release) the mouse
     on the desired drive icon.  The alternate method is
     to strike the [Home] key and use the arrow keys to
     move to the desired drive then strike [Enter Ù].
     The drive icon will now move with the mouse or arrow
     keys.  Move the icon into the work area (the large
     open area) and click on the left mouse button or
     strike [Enter Ù].  You may have two fileboxes open
     simutaneously.
    To re-read a disk after a floppy disk change, click
     on the magenta switch in the upper right corner.
    To close a filebox click on the red switch located
     in the upper left corner of the filebox.
    To copy a file from one filebox to the other first
     click on the file icon   , the filename will be
     shown in reverse video.  Click on the file icon a
     second time and the file icon and filename will now
è01805403
è24028002
006
26
     move with the mouse.  Move the filename to the other
     filebox and click the left mouse button.  A file
     status box will appear and indicate that the copy
     operation is in progress.
    To print a text file first click on the file icon
        , the filename will be shown in reverse video.
     Click on the file icon a second time and the file-
     name will move with the mouse.  Move the filename to
     the printer and place the file icon on the printer.
     Click the left button of the mouse. After confirma-
     tion the file will be sent to the printer.
    To send a formfeed to the printer place the mouse
     cursor on the printer and press the left mouse but-
     ton.  After a confirmation the ASCII code 12 will
     be sent to the printer.
    To delete a file first click on the file icon   ,
     the filename will be shown in reverse video.  Click
     on the file icon a second time and the filename will
     move with the mouse.  Move the filename to the dust
     bin and click the left mouse button.  After confirm-
     ation the file will be deleted (erased).
è06410002
è01810406
è42422002
è01823607
007
24
þ Operations with sub-directories.
    All sub-directories are identified by the directory
     icon  .
    To change directories click on the directory icon,
     the directory name will appear in reverse video.
     Click on the directory icon a second time and the
     contents of that sub-directory will now be dis-
     played in that filebox.  The current pathname is
     always displayed at the foot of the filebox. Notice
     that the pathname may be truncated, i.e. from
     TMP\CLASSLIB\EXAMPLE to \...\CLASSLIB\EXAMPLE.
    To return to the parent directory or root directory
     follow the above procedure with the   .. directory
     icon.
    To delete a sub-directory first click on the direc-
     tory icon.  Then click on the Dir switch on the top
     menu bar.  When the drop menu appears click on
     Remove directory.  The sub-directory will be deleted
     without confirmation.  If the sub-directory contains
     files or sub-directories then an error box will ap-
     pear and the sub-directory will not be deleted.
è09606401
è34618401
008
22
þ Get Info (files)                             [Files F2]
     Returns the date, time, and size of the currently
     selected file.  This function is not available with
     multiple select active.

þ Copy to...                                   [Files F2]
     Copies currently selected file to another filename
     while keeping the selected file unchanged.  Enter
     the new filename at the prompt.  This function is
     not available with multimple select active.

þ Rename...                                    [Files F2]
     Renames the currently selected file.  Enter the new
     name at the prompt.  This function is not available
     with multiple select active.

þ Run..                                        [Files F2]
     Loads a second copy of your command interperter and
     runs the selected .EXE, .COM, or .BAT file.  This
     function is not available with multiple select
     active.
009
24
þ DOS shell                                    [Files F2]
     Loads a second copy of your command interperter and
     allows you to operate as you would in DOS. Type EXIT
     to return to Gen7.

þ Quit                                         [Files F2]
     Exits Gen7 and returns control to DOS.

   __________________________________________________


þ Copy selected (multiple active)           [Multiple F3]
     Copies ALL selected file(s).

þ Move selected (multiple active)           [Multiple F3]
     Copies ALL selected file(s) and after a successful
     copy, deletes selected file(s) in active filebox.

þ Delete selected (multiple active)         [Multiple F3]
     Deletes ALL selected file(s) in active filebox.  In-
     dividual confirmation may be deactivated in which
     case ALL selected file(s) are deleted after only ONE
     confirmation!
010
26
þ Multiple ON/OFF   (Ctrl-F3)               [Multiple F3]
     This selection toggles the multiple select option on
     and off.  After the multi-select icon appears, using
     the mouse or arrow keys move the icon to the desired
     filebox.
     
     Press the left mouse button or strike [Enter Ù].
     The highlighted filebox will allow multiple file
     selection.  Clicking on the blue switch that appears
     in the upper left corner of the filebox will toggle
     between all files selected and all files de-selected.

   __________________________________________________


þ Create sub-directory   (Ctrl-F4)               [Dir F4]
     Creates a sub-directory within the filebox selected
     with the directory icon. (See Multiple ON/OFF for an
è13009000(NOTE: if only one filebox is open the icon
è05810200will not appear, the open filebox is selected.)
è25824600(See Multiple ON/OFF for an
è05825800explanation of how to select a filebox with the
è05827000directory icon.)
è01806608
è01823805
011
24
þ Remove sub-directory                           [Dir F4]
     Removes the selected sub-directory without confirma-
     tion.  Will not remove sub-directories that contain
     files or sub-directories.
þ Set File Select.                               [Dir F4]
     Sets the file selection string (* and ? are allowed).
     This string is used in all sub-directory listings.
     Example: *.COM will list only COM files.
   __________________________________________________
þ Disk copy                                     [Disk F5]
     Uses your DOS diskcopy program.  This option is
     active only if Gen7 locates DISKCOPY.COM.  Ensure
     that the sub-directory where this file is located
     is included in your DOS PATH statement.  Refer to
     your DOS reference manual concerning the proper use
     of the PATH statement.
þ Format                                        [Disk F5]
     Uses your DOS format program.  This option is active
     only if Gen7 locates FORMAT.COM.  Ensure that the
     sub-directory where the file is located is included
     in your DOS PATH statement.  
è28228200(See Disk copy above.)
è05829400(Continued on next page.)
012
24
þ Format    (continued from previous page.)
     After selecting either drive A or B, you may select
     the size option.  Use the size option when format-
     ting a low density disk in a high density drive.
     Make your selection depending on the size of disk
     being formatted                          .

þ System disk                                   [Disk F5]
     Formats a disk and transfers the system files using
     the format program included with your DOS.


þ Get Info (disk)   (Ctrl-F5)                   [Disk F5]
     Displays the volume ID, size, and bytes free of the
     selected drive.  Also displays information about the
     current sub-directory.  This includes the total and
     selected bytes. 
è18610200(i.e. 3« inch or 5¬ inch)
è05816200(See Format on previous page.)
è18623400(See Multiple ON/OFF for an explan-
è05824600ation of how to select a filebox with the info
è05825800icon, Page 11.)
è01821004
013
24
þ Reminder ON/OFF          [Desktop F6 - Calendar/Music]
     Set reminder to ON if you want to be alerted to
     memos entered into the calendar utility.
þ Set look-ahead           [Desktop F6 - Calendar/Music]
     Set for number of days advance notification of up-
     coming memos entered into the calendar utility.
þ Clear calendar           [Desktop F6 - Calendar/Music]
     Clears all memos from the calendar utility that do
     NOT have the keep option activated.
þ Reconcile Acount         [Desktop F6 - Calendar/Music]
     Resets account balance to given amount. See the
     Accounting module on page 32.
þ Play a Song              [Desktop F6 - Calendar/Music]
     Allows playing a song from a default selection of
     twelve.  The music plays continuously in the back-
     ground.  Register the Song Database for more songs.
þ Stop the Music           [Desktop F6 - Calendar/Music]
     Stops the current song from playing.
þ Set alarm   (Ctrl-F6)                     [Desktop F6]
     Enter the hour using 24 hour notation then enter
     the minutes.  This will override an alarm setting
     by the calendar utility.  The alarm is only active
     while in Gen7.  To set the alarm automatically,
     enter a memo in the calendar utility with the alarm
     option activated.  A song may play in lieu of a bell.
014
23
þ Colors                                    [DeskTop F6]
     You may select from 16 background patterns and/or
     colors for the work area.  Click (press & release)
     the mouse on your selection, strike [Esc] to quit.
þ Install icon                               [Desktop F6]
     Tag an often used program to run from Gen7.  The
     program must NOT require more than 75k of free
     memory in a 640k system.
þ Remove icon                                [Desktop F6]
     Untag a program.

   ___________________________________________________

þ DOS version                                 [System F7]
     Display the Disk Operating System version number.
þ Set system date                             [System F7]
     Sets the system date.  Use the format MM DD YY to
     enter the date.  Strike [Enter Ù] after each entry.
þ Set system time   (Ctrl-F7)                 [System F7]
     Sets the system date. Use 24 hour notation.  Strike
     [Enter Ù] after each entry.
è05816200(See page 18 for detailed operation.)
015
22
þ Equipment                                   [System F7]
     This option will return general information about
     your system.

þ Available Memory                            [System F7]
     This option will return the number of bytes of memory
     available for GEN7.

   __________________________________________________


þ Display                                      [Setup F8]
     Choose between EGA/VGA color or monochrome monitor.
     A EGA or VGA color graphics adapter is required
     even though monochrome is selected.

þ Auto screen save                             [Setup F8]
     Select the number of minutes, 5 to 30, that Gen7
     will wait before switching to the random pattern
     screen to prevent screen burn-in.

016
26
þ Confirm deletes                              [Setup F8]
     On/Off switch to enable/disable individual confirma-
     tion of file deletion while multiple select is
     active.  With the switch OFF you will be prompted
     once to confirm deletion of ALL selected files.
     The switch ON forces confirmation of each file.

þ Install editor                               [Setup F8]
     Installs external editor run from the 'Editor' icon.


þ Auto save                                    [Setup F8]
     Enables/disables automatic saving of the current
     configuration information when you exit the program.
     If a program icon is installed or removed the con-
     figuration file must be saved to retain the changes.

þ Save settings   (Ctrl-F8)       [Desktop F6 & Setup F8]
     Save configuration information NOW!  Configuration
     information should be saved after installing or re-
     moving program icons, changing the work area back-
     ground and/or color, and after any changes under
     the Setup menu.
è05815000(See Using a text editor with Gen7, page 24.)
è26430600(See Auto save above.)
017
25
þ Installing and removing user programs.    [Desktop F6]
     You may install up to four user programs as icons
     to run from Gen7.  There are two requirements,
     first the program must not require more than 75k
     of free memory to run (in 640k).  Secondly the file 
     must be an executable file, i.e. files that have 
     the .BAT, .EXE, or .COM extensions.
    Open a filebox then move to the program file (re-
     fer to pages 6 & 8).  Select the program file with
     the mouse, clicking on the file icon   .  Click on
     the Desktop switch on the top menu bar and select
     'Install icon' from the menu.  When the options box
     appears click on the switch below the icon that you
     feel best represents the program type.  Now click
     on the 'Prompt' box.  The mouse cursor will be re-
     placed with a text cursor.  Type in an appropiate
     name and strike [Return Ù].  This name does not
     have to be the program filename.  Click on either
     the 'Continue' or 'Cancel' switch.  If you click on
     'Cancel' the operation will be aborted.  'Continue'
     will procede with the operation and you will be
     presented with a dialog box that will display the
     appropiate error or 'Icon created' message.
è35414702
018
21
    To remove a program icon first close all fileboxes.
     Click on the Desktop switch and select 'Remove
     icon' from the menu.  When the option box appears
     click on the program icon that you wish to remove.
     The icon now becomes the mouse cursor.  Move the
     icon to the rectangle located in the option box and
     click the mouse once again.  You will be given the
     option of continuing or canceling the operation.

þ Using the program icon(s).
    To run the program that the icon represents first
    click on the icon.  The icon will now become the
    mouse cursor.  Move the icon to the work area and
    click the mouse once again.  Gen7 keeps track of
    the directory and drive where the program resided
    when the icon was created.  Gen7 will locate and
    run the program using this information.  If the
    program is relocated in another drive or directory,
    the old icon should be removed and a new icon must
    be created.
019
26
þ Using the calendar.
     The calendar utility allows you to enter short
     memos/reminders that can be accessed through the
     utility itself or activated automatically when
     Gen7 loads and runs. See page 31 for Accounting.
   ___________________________________________________

    Control panel.
   	      - Quit the calendar utility and rewrite the
     GEN7.CAL memo file.
   	      - Brings up the Gen7 help utility.
   	        - Clears the current month's memos. (See
     also                                         .)
   	                          - Automatically generates
     repetitive memos at the selected interval.

    To select a month or year click (press & release)
     the left mouse button on either the up or down
     arrow located at the year and month 'boxes'.
è01805809
è05813800Quit
è05816200Help
è05817400Clear!
è09818600Desktop/Calendar/Clear calendar, page 13
è05819800Weekly/Bi-Weekly/Monthly
020
26
þ Creating a memo.
     Click (press & release) the left mouse button on
      the desired date.  You must click on the numerals,
      NOT the box as some boxes may represent two dates.
     After the memo box appears, move the mouse cursor
      to the first line in the memo area.  Click the
      left mouse button and the mouse cursor(I-beam)
      will be replaced by a vertical line.  Enter the
      memo from the keyboard, striking [Enter Ù] after
      each line.  After entering the memo choose the ap-
      propiate option(s) from the memo box control
      panel.  The following options may be selected:

           - This prevents the clear functions from
      erasing the memo.
            - After selecting this option an input box
      will appear.  Enter the time using 24 hour nota-
      tion.  The alarm will sound on the given date and
      time if Gen7 is running.
              - Exits the memo box and erases the cur-
      rent memo.  This overrides the 'keep' function.
è06619800Keep
è06622200Alarm
è03622615
è06627000Discard
021
19
           - Saves the current memo to GEN7.CAL when
      the calendar utility is exited.

          All dates with current memos will be high-
          lighted with a red background.

     To repeat a memo on a weekly, bi-weekly, or month-
      ly basis, select the appropiate switch from the
      calendar control panel before selecting a date.
      Click on the switch a second time to cancel the
      option.  When you save the memo an option box will
      appear.  Select the desired number of repetitions
      by clicking on either the up or down switch locat-
      ed within the option box.  The calendar utility
      will now create the memo for the selected repeti-
      tion at the desired interval automatically.
è06604200Save
è05007800NOTE:
022
21
þ Using the calculator.
     The calculator operates like any standard calcula-
     tor. You may enter the number via the keyboard or
     click (press & release) the left mouse button to
     select the numerals and functions of the calculator.
     To exit calculator utility, click on the red switch
     in the upper left corner.

þ Miscellaneous functions.
    Click on the alarm clock    in the upper right to
     toggle the alarm on and off.
    The   pull down menu:
     	  About Gen7.
     	  Help.
     	  Large clock.
     	  Save screen - Save the screen NOW!
     	  Redo screen - Redraws the main screen.
è01805810
è25814615
è09017400
023
26
þ Using a text editor with Gen7.
    Open a filebox then move to your text editor (re-
     fer to pages 6 & 8).  Select the text editor with
     the mouse, clicking on the file icon   .  Click on
     the Setup switch on the top menu bar and select
     'Install editor' from the menu.   Click on either
     the 'Continue' or 'Cancel' switch.  
    The Internal editor can edit a file up to 11K:  
       PgUp, PgDn and Cntl PgUp, Cntl PgDn scroll up/dn
       Cntl Y deletes a line, Cntl J inserts a line.   
       Home, End go to beginning and end of line.       
       Ins inserts one char, Del deletes, Esc exits.
       Alt S Search forward, Alt B Search Backward.
       Alt R Replace forward, Alt P Replace Backward.
    To use the text editor  to edit or view a text file
     while a filebox is open, first click on the file
     icon   .  Click on the icon a second time and 'move
     the file' to the text editor icon.  Click the mouse
     once again and the text editor will run and auto-
     matically load the selected file.
è01806613
è35407602
è09823202
è23420800*
è05828200(The editor must accept filename parameters.)
024
23

þ Children's Tutorials

    To use the Children's Tutorials, close all open
     fileboxes and click on the 'MATHTUTR' or 'TIMETUTR'
     icon.  The icon will now become the mouse cursor.  
     Move the icon to the work area and click the mouse 
     once again.  The Math tutor is similar to the 
     calculator except it has four modes of operation:
        1) Choose operators (Level 1 and 2).
        2) Choose digits (Level 1 and 2).
        3) Memory game (Level 1 and 2), remember the 
           number.
        4) Calculator mode.
     The time tutor has a digital and analog clock for
     children to learn time telling.  In Show mode, 
     the time is shown in the digital window, reflecting
     the hands on the analog clock.  In Quiz mode, a 
     time is shown in the digital window, and the analog 
     clock must be set to the proper time before pressing
     the answer button.  Try playing a tune in the 
     background!  To exit the tutors, press the red button 
     in the upper middle of the calculator or clock.
025
19


                    Quick Reference

  F1................Help     Ctrl-F1.......About Gen7
  F2...............Files     Ctrl-F2....Close all files
  F3.....Multiple select     Ctrl-F3....Multiple ON/OFF
  F4.Directory functions     Ctrl-F4...Create directory
  F5......Disk functions     Ctrl-F5...Disk information
  F6.............Desktop     Ctrl-F6..........Set alarm
  F7....System functions     Ctrl-F7....Set system time
  F8....Configure Gen7       Ctrl-F8.Save configuration
  F9..........Show clock     Ctrl-F9...Show large clock
  F10........Save screen     Ctrl-F10.......Redo screen

  While in Dropbox.........[Esc] will exit Dropbox/Menu
  While in work area..[Esc] will locate mouse at center
                            of work area.
026
19
                       WARRANTY
The author makes no warranty of any kind, expressed or
implied, including, without limitation, and warranties
of merchantability and/or fitness for a particular
purpose.

The author shall not be liable for any damages, whether
direct, indirect, special or consequential arising from
a failure of this program to operate in the manner desir-
ed by the user.

The author shall not be liable for any damage to data or
property which may be caused directly or indirectly  by
the use of this program. IN NO EVENT will the author be
liable to you for any damages, including any lost profits
lost savings or other incidental or consequential damages
arising out of your use or inability to use the program,
or from any claim by any other party.
027
24
              License & Copyright Notice

 GEN7, is copyrighted property of Synergistic Consultants, 
 Incorporated.  The phrases: 'Intuitionware--Revealing 
 Your Hidden Creativity' and 'GEN7 Software' are the 
 registered trademarks of Synergistic Consultants, 
 Incorporated.  PC-HyperText Architect, PC-Applications
 Architect and PC-Language Architect are a trademarks
 of Synergistic Consultants, Incorporated.  You are 
 granted a limited license to use this material.  The 
 evaluation version may be freely copied unmodified, for 
 a nominal fee (not to exceed $5).  This program contains
 security processing to prevent files from being exchanged
 between the evaluation version and the registered version
 The registered version of this program may not be copied 
 or distributed except under the conditions of the license 
 on page 30.  The entry credits clearly state if this 
 program is the registered or evaluation version.  The 
 evaluation version may not be resold, the registered 
 version may be resold as a separate product under the 
 license terms.
è02429400(See License for Registered Users, Page 30).
è02430600(See Ordering Information, page 31 for pricing).
028
13
              License & Copyright Notice (continued)

* AT, IBM, PS/1, and PS/2 are registered trademarks and
  PC/XT is a trademark of International Business Machines
  Corporation.
* Turbo Pascal is a trademark of Borland International.
* Portions of the runtime library and data are licensed 
  from Borland International.
* Quick Pascal is a trademark of Microsoft Corporation.
* LHA is copyrighted by Haraysu Yoshizaki.
* Portions of this program are licensed from 
  Robert L. Steinbach.
029
24
 License for Registered Users - The owner may only:
 1) Use this program on a single machine.
 2) Make a machine readable backup copy of the software
    to support the use of it on a single machine.
 3) Transfer the program and license to another party if
    the other party agrees to the terms and conditions 
    of this Agreement.  If it is transferred to another 
    party, all copies of the program and data not 
    transferred to the other party must be destroyed.
 4) Sell or transfer the program as a tutorial, help 
    or music playing software with data generated by 
    PC-HyperText Architect.  This program may not be 
    resold as a HyperText help generator or Desktop 
    utility except under condition 3 of this license.  
    A HyperText help generator is defined to be a 
    program that generates data for HyperText screens 
    to compete with or replace PC-HyperText Architect.  
    A Desktop Utility is any program that would allow 
    the users to generate a DeskTop utility program 
    for resale.  Specifically, this program may be 
    resold with the data it has generated and play or 
    display this data, but the program may not be 
    resold by the registered user as a data generator.
030
25
  Ordering Information:
  Send to:   Synergistic Consultants, Incorporated
             Post Office Box 18888
             Huntsville, AL 35804-8888
             1-800-828-8384 (Order, help, fax line)
  Prices:

  Register the Tutorials Version 1.2: $10.00
  Register the Accounting Module Version 1.2: $15.00
  Register the Music DataBase Version 1.0: $10.00
  Register All three for $30.00.
    (All with GEN7 Desktop, and printed, bound manual)
  Registration of the Daily Quote module is automatic
    with the registration of any or all of the above.
    It includes over a year's worth of quotations
    assembled by one person at Synergistic Consultants.
    The categories may be restricted or disabled if 
    so desired.
  Look for other upcoming add-on modules and sets of data
    to be used with these products, generated by
    PC-HyperText Architect.

  Call or write for pricing and availability of 
    PC-HyperText Architect or PC-Screen Utilities.
031
24
 Accounting Module:

 The accounting module is built into the calendar
   function of the GEN7 DeskTop.  To access this  
   function, refer to the calendar function on page
   19 for details about the standard memo function.
   The Accounting module transaction types:
        1) Automatic Credit (posts auto deposit checks).
        2) Automatic Debt (posts auto debts).        
        3) Manual Credit for other types of deposits.
        4) Manual Debt for personal or business checks.
   The manual debts and credits allow a check number.  All 
   transactions have a memo, recepient and amount fields.
   A grace period before and after the transaction may be
   specified for the calendar function to begin and stop 
   alerting the user of the transaction's specified post 
   date.  A music or bell type alarm may be designated to 
   accompany the transaction when it is displayed on entry 
   to GEN7.  When you register, you receive a stand alone 
   program to be run from AUTOEXEC that is configured with 
   GEN7, to remind you of bills and credits to post.  The
   Reconcile Acount lets you set the account balances (See
   Desktop F6 - Calendar/Music on page 14.
032

